Combination Plier
Size - 150mm and 200mm
Material - Made of Steel with or without insulation.
Purpose - wire twisting, cutting, gripping of round and flat jobs.
Maintenance - It should not be used as hammer. Prevent form rust. Hot substances grip should be avoided. Prevent cutting of hard substances containing steel. Insulation should not be damaged. Lubricate the moving part.
Long Nose Plier
Size - 100mm, 150mm and 200mm
Material - Made of Steel with or without insulation.
Purpose - Used for holding, tightening and loosening,
Maintenance - It should not be used as hammer. Prevent form rust. Hot substances grip should be avoided. Prevent cutting of hard substances containing steel. Insulation should not be damaged. Lubricate the moving part.
Flat Nose Plier
Size -
Material -
Purpose - It is used for holding flat objects like hexagonal nuts at places where other places cannot reach.
Maintenance - It should not be used as hammer. Prevent form rust. Hot substances grip should be avoided. Prevent cutting of hard substances containing steel. Insulation should not be damaged. Lubricate the moving part.
Round Nose Plier
Size -
Material -
Purpose - Making loops of wires and hooks of thin wires. Connecting and disconnecting wires in narrow locations. Tightening and loosening small nuts in narrow locations.
Maintenance - It should not be used as hammer. Prevent form rust. Hot substances grip should be avoided. Prevent cutting of hard substances containing steel. Insulation should not be damaged. Lubricate the moving part.
Channel Lock Piler
Size -
Material -
Purpose - It is a slip joint plier. They have notched jaws generally set 45 to 60 degrees from
the handles.
Maintenance -
Side Cutting Plier
Size - 75, 100, 150, 200, 250, 300 mm
Material -
Purpose - Cutting, pulling and nipping the insulation from wire. Its blunt, wide nose is used to twist wires before a nut or any device. Armature windings, instrumentation work, radio assembly.
Maintenance -
Screw Driver
Size - 75, 100, 150, 200, 250, 300 mm
Material - Hardened steel and tempered
Purpose - It is used to loosen or tighten screws with slotted heads. They are available in various sizes and shapes as per requirement
Types of Screw Driver
Standard /Flatserew driver
The blade tip is wedge-shaped and looks similar mathematics negative sign -.
It is used to drive screws with straight, linear notch in heads.
The principal drawback of a flat-head screwdriver is that prone to slipping out of the Screw slot, so choosing Screwdriver that fits just right is key to correct use.
Philips screw driver
It has a cross tip that resembles with the mathematics position sign (+). It is used to drive the screws with cross slot beads.
Stubby screw driver
It is available in either standard or Philips screwdriver with short shank or blade and a short handle.
It is used to drive the screw in case of space congestion or in tight places where a tight screw driver cannot be used.
Alen screw driver
It has shape of screw driver or wrench. It performs the function to tighten or loosen the screw
hexagonal head slots. The tool is unique in that it fits into a receptacle to tum it rather than around a screw or bolt like a regular wrench It has an advantage of small size and light weight.
Line Tester
Itis used to check both AC and DC voltage and current and test the phase, live or positive wire conductor. It is also used to check basic circuit characteristics like continuity, short and open circuits, polarity.
0 Comments